|
Product Information |
AD4 Medium Current |
AD4 High Current
Edge Connector |
Ordering Information
|
EASYDCC AD4MC Medium Current Accessory Decoder
|
|
• Drives 4 independent two-wire switch machines, lamps or LEDs
• Directly drives Kato and LGB two-wire switch machines
• One output can drive 10 Tortoise switch machines at same time!
• Maximum output is 500mA (1/2 Amp) per output at ~12VDC
• Use track power or use an external power supply
• Can also be used at 8, independent, medium current push-pull drivers
• 100% compatible with all brands of DCC systems
• Full 2048 address range
• Supports main track programming
• Each of the 4 inputs are independent - mix machines and lamps
• Manual "local" switch inputs
• Lock and unlock local inputs remotely
• Programmable pulse, flash or continuous-on outputs
• Output state restored after power down (except for pulse)
• Three different connection options
• 100% NMRA tested and certified
• Fully assembled
• Use with or without the standard edge-card connector
|
| Medium Current Accessory Decoder Ordering |
| Medium current decoder |
AD4MC |
|
