|
|
|
True Route |
Speed Table |
RS232 Port |
Third Party
|
|
EASYDCC Decoder Speed Table Programming
|
|
Program the Locomotive's Decoder's Speed Table on the Mainline!
|
The EASYDCC Commmand Station provides a convenient and simple method for adjusting the throttle response of locomotive decoders.
Built into the Command Station are eight different speed curves which may be programmed into the decoder.
A selected speed curve can be automatically programmed into the decoder with the push of a couple of keys.
Unlike other systems, this feature can be used while the locomotive is on the maintrack.
No need to move it to the programming track and no tedious manual programming of each step, one at the time.
The speed tables are stored inside the Command Station so you can use them as is, or edit the tables to create your own unique speed curves.
The manual includes a tabular listing of each speed table and its associated CV speed step.
Below is a graph comparing the different speed tables.
|
 |
| Return to top |
|
|
P.O. Box 835772 · Richardson, TX 75083-5772
Phone: 972.238.9966 · Fax: 972.516.9527
email: cvpusa@sbcglobal.net · www.cvpusa.com
This website is best viewed using Microsoft Internet Explorer.
Some pages may not view properly in other browsers.
Some browser settings may cause problems when viewing this website. Choose your browser:
• Microsoft Internet Explorer
• Mozilla
|
|
|
