|
Command Station |
Features |
Basic Hookup |
Starter Systems |
Ordering Information
|
EASYDCC Starter Systems
|
|
EASYDCC System Components
|
Basic
|
Wireless
|
Plug-In
|
|
Master Command Station [CS2]
|
|
|
|
|
CS2 Transformer 12VAC 200mA
|
|
|
|
|
Modular connecting cables
|
|
|
|
|
Booster3 [B3A]
|
|
|
|
|
Installation and Operation Manual
|
|
|
|
|
FREE RS232 Computer Port
|
|
|
|
|
FREE Technical Support
|
|
|
|
|
Wireless Throttle [RF1300]
|
|
|
|
|
Wireless Receiver [RX900]
|
|
|
|
|
Throttle Bus Extender Board [EDXA]
|
|
|
|
|
Extender Transformer 12VAC at 1.5A
|
|
|
|
|
Plug-In Throttle [XR1300]
|
|
|
|
|
Starter System Order Number
|
4EDSA
|
4WEDSA
|
4EDSXA
|
|
Basic Starter System [EDSA] is designed for small, first-time layout owners with plans for later expansion.
If you don't have a power supply for the Booster, consider adding a low cost PS5.
With this system, you get two fixed throttles built into the panel mounted Command Station plus a booster for driving the track.
Behind the distinctive front panel is a full-featured Command Station plus a separate programming track output, a free RS232 computer port, plus outputs for booster connections.
You can add plug-in or wireless throttles at any time.
|
| Return to top |
Wireless Starter System [WEDSA] is CVP's award winning wireless DCC system that was voted by the readers of Model Railroader Magazine as the most innovative product for 1999.
A wireless throttle means there are no cords, no cables, no throttle buses, and no fascia plates.
You can stay with your train at all times.
No need to search for a place to plug in your throttle.
And the Wireless Throttle is easy to use.
You can hand this throttle to a guest and within 5 seconds, they can be running a train.
The Wireless Throttle System adds a wireless receiver and wireless throttle to our basic starter system.
The wireless basestation supports up to eight more wireless throttles.
Plug-in throttles can also be used along with the wireless throttles.
This is our most popular starter system with an unbeatable list of features.
|
| Return to top |
Plug-In Throttle Starter System [EDXSA] adds the plug-in throttle to the Basic Starter System.
The plug-in throttle is an economical and easy to use throttle.
It features a large knob and a full set of function keys.
Accessory decoders can be controlled from the throttle too.
If your layout features lots of industry switching or extensive main line operation, the plug-in throttle is the least expensive way to stay with your train.
The battery-free plug-in throttle uses a rugged two-conductor 1/4" headphone plug attached to a convenient coiled cable.
It is easy to learn and simple to use.
The plug-in throttles all plug into CVP's unique 2-wire throttle bus.
The throttle bus uses inexpensive TV-coax cable plus twist-on connectors to make installation a breeze.
Fascia plate kits provide convenient places to plug throttles in.
|
| Return to top |
|
Large Scale Options: If your layout is O or LGB, there are several important options to consider when ordering a starter system.
For example, the Booster-10 may be needed to handle the higher motor currents and longer track runs.
Or you may wish to use a higher voltage transformer for the Booster-10 to provide a higher track voltage needed by LGB locomotives.
Rest your mouse over the "Boosters" button at the top left and choose "B10" to view details on the high power Booster-10.
|
| Return to top |
|
Which Locomotive Decoder? Any DCC decoder may be used with EASYDCC.
Select decoders based on your budget, type of locomotives and desired features.
If you have any questions or wish to discuss your layout requirements, please give us a call.
We will be happy to suggest the best system configuration to meet your layout requirements.
We guarantee it!
|
| Return to top |
