|
|
CVP Products Customer Feedback
|
In 1997, almost 20 years after the publication of my landmark CTC16 series, command control came of age with the release and publication of the EasyDCC system.
This new command control system was based on the NMRA-DCC standards and recommended practices.
The system was featured in a 6 part do-it-yourself series of articles in Model Railroader Magazine, beginning in the February 1997 issue and concluding in the July 1997 issue.
Readers and builders of the EasyDCC system sent letters and email to both me and the magazine.
Below are a sampling of them - some published in Model Railroader’s letters-to-the-editor (RPO) section.
EasyDCC joins a long list of projects and more than 35 articles in which I take something complex and make is easy to build, easy to install and easy to use.
EasyDCC is no different and, once again, raises the bar.
We now offer fully assembled and tested systems so you have the choice of saving time or saving a little money.
In addition, EasyDCC is the first kit based system to be awarded an NMRA Conformance Warrant.
Don’t be left out.
Experience the excitement and fun of operation with EasyDCC.
Keith Gutierrez
|
|
"A STEP FORWARD"
|
"FLAWLESS"
|
"We’re happy to present EasyDCC to enhance and support the NMRA-DCC standard and as a step forward in making model railroading easier and more enjoyable for all hobbyists."
Andy Sperandeo, Editor
February 1997 Editorial
Model Railroader Magazine
|
"I switched to EasyDCC and instantly recognized this is what I really wanted.
EasyDCC worked flawlessly.
No more embarrassing system failures.
And their service is second to none."
Jim Senese
Kansas City Terminal RR
Claremore, OK
|
|
"IT IS EASY"
|
"VERY REWARDING"
|
"I’ve never assembled an electronics kit before but the instructions in the article were flawless and the system went together easily.
My compliments!"
Buzz Foster
Amherst, MA
May 1997 Model Railroader Magazine’s RPO Section
|
"The magazine articles were excellent and very lucid.
I had no difficulty in assembly and the project was very rewarding.
Thank you for presenting the Model Railroader’s EasyDCC."
Dheerendra Prasad
Charlottesville, VA
June 1997 Model Railroader Magazine’s RPO Section
|
| Return to top |
|
"THE BEST EVER"
|
"A QUALITY PRODUCT"
|
"The EasyDCC series is the best thing (MR) has ever done.
I had been waffling and stalling on DCC for years but EasyDCC got me off my duff and into it.
It’s easy and it works!”"
Bob Eckerfield
Missouri City, TX
June 1997 Model Railroader Magazine’s RPO Section
|
"I want to commend you for the quality of your products and the chance it gives me, with limited funds, to get the advantages of DCC."
Bill Hasty
Chanute, KS
|
| Return to top |
|
"I SWITCHED!"
|
"LEXUS CLASS SERVICE"
|
"I switched to EasyDCC after using another brand for several years, and I've never been sorry.
I've had very good experiences with the folks at CVP, both when there was a minor problem and when I've suggested changes."
Mike Dodd
Montpelier, VA
|
"Thanks again for your patience and help.
One of our cars is a Lexus.
Lexus understands customer service and satisfaction.
You also understand how important his is.
Let me know if you ever start a car company!"
John Underhill
Granger, IN
|
| Return to top |
|
"A GOOD BUY!"
|
"WIDER AISLES"
|
"I'd like to express my satisfaction with the EasyDCC System.
It works without any problems; it's easy to program and to control.
A good buy which makes a lot of railroading fun!"
Marc de Boer
The Netherlands
|
"The wireless throttle is operating perfectly.
I also want to thank you for my wider aisles.
It seems the absence of cords and the worry of looking for the next throttle jack are gone.
Operators can now pass each other without fear of tangled throttle cords."
Jerry Sanders
Atlanta, GA
|
| Return to top |
|
"I DON'T NEED TO THINK"
|
"IT WORKED FIRST TRY"
|
"Perfectly named!
I replaced my first DCC system with your EasyDCC System.
Now I don't have to think or even refer to a manual to do anything.
I't easy!"
Jim Hamlin
Plano, TX
|
"The upgrade was easy although I have never fooled with electronics.
I must be a genius!
Or more likely you guys are smart enough to make it dummy proof.
It worked first try!"
Doug Blair
Port Huron, MI
|
| Return to top |
